Robotics FTC Regional Final

Written by Ramin H. (Y12)
This was going to be our biggest challenge yet. It was finally the day that the trees of our tireless labour would bear fruit, and we sure did hope that the fruit was going to be good. Everyone was fired up yet shaking with nerves. This was it.
The stressful buildup had stretched across the entire week, and things couldn’t have gone any worse. Motor pieces were falling off, screws were coming undone, and the motors themselves were overheating to oblivion. It took a visible toll on morale. The builders were devastated; the programmers were stressed. After all, how could we test a robot that couldn't keep itself together?
There was only one thing to do: keep trying to fix it. Every single day after school, Monday to Friday, the builders stayed back as late as possible, and the programmers stayed later still. Countless fixes were made, yet countless new issues arose. It felt like we were going up against the world, until things finally started to improve bit by bit.
Come Friday, 27th February, Sayhan and I did it. We finally found a way to keep the motor from falling off. It was a dodgy fix, with just a single shaft collar holding everything together, but it was what our dreams relied on. 4:40 PM that day felt like magic. Sure, we hadn't done any testing, and we had no idea if the shaft collar would actually hold. But we had hope, and that’s what kept us going.
The Morning of the Event
It was cold yet sunny, with a Woolwich wind that chilled us to the bone. I arrived first, and over the next half hour, the rest of the team assembled. Wearing our Oxford Navy hoodies with our logo, we felt united, and easily looked like the snazziest and most close-knit team there. Teamwork got us here, and it was going to get us through.
Then came testing. The motor was slow: it had high torque, no speed, and didn’t shoot high enough. With judging fast approaching, we weren't ready in the slightest. We called over a competition technician, who helped us fix the motor and get the code sorted just in time.
Judging was an interview with two experienced programmers. Fortunately, it went brilliantly with Aaila leading us. As our invaluable data officer, she had compiled a fantastic engineering portfolio detailing everything from the robot's build to the fundraisers we held to afford our parts and hoodies.
The inspection was nerve-racking, with a barrage of questions fired at us like "Do you have any pneumatics?" and "Have you followed all our guidelines?", but we passed. All that was left were the qualifier matches.
The Games
No one expected Orion X to start as well as we did. Flying across the arena with smooth motion, we tore through our first three matches. Despite minimal testing, the robot performed brilliantly, and the shooter motor worked almost flawlessly, barring a couple of wayward shots. By lunch, we had won three out of three. Firmly in first place, we felt untouchable.
Then, it all came crashing down. The fourth match was our first loss, and a painful one at that. Our alliance’s human player kept gifting foul points to the opposition by touching the artefact while it was still in contact with the robot. These minor penalties tallied up to a crippling 45 point deficit. Despite scoring more artefacts in the goal, Orion X’s alliance lost by a huge margin, dropping us to fourth place with qualification hanging by a thread.
Things only got worse. In our fifth and final qualifier, the battery died midway through, rendering our robot almost useless. With our top four spot no longer secure, our chances of qualifying depended entirely on the final match of the round: if the Red alliance won, we were out; if the Blue alliance won, we just might scrape through. By a huge stroke of luck, Blue won. We were in.
The Final
Both LAET teams made it to the final. To guarantee that the school would advance regardless of the outcome, we split our teams up to face each other. Orion X was paired with Excelsior Mini Robotics, whose robot could only move, not shoot. This meant the onus was entirely on us to score in the best of three series.
However, our battery was already drained from the previous match and wouldn't survive all three games. It held out for the first, though, where we secured a thumping victory to go 1 to 0 up. We needed just one more win for the regional title and a spot at the national finals.
Heartbreak struck in the second match. Once again, the battery proved unreliable. We got some life out of it early on, but it ran out of juice before the second half, leaving our alliance helpless. Orion Alpha and their alliance took the win, levelling the series at 1 to 1. Everything came down to the decider.
All our hopes came crashing down in the third match. We had scrambled to find a replacement battery, but we didn't test it, which proved to be a fatal mistake. The robot moved sluggishly, almost as if it didn't want to partake. Orion Alpha and their alliance were the only possible winners from that point on. All our hard work was crushed by a single moment of bad luck. At 2 to 1, the finals were over, and Orion X was out.
The Awards
All was not for nothing, however. Together, both teams ensured that LAET stole the show. Orion X took home the Finalist Award as well as the Innovate Award for our ingenious use of 3D printing and eco-friendly materials. Meanwhile, Orion Alpha won the Winning Alliance Award alongside the Inspire Award for their outreach work bringing robotics to under-represented communities.
Coming away with so much silverware reflected every hour we sacrificed. Losing in that manner was heartbreaking, but the experience we gained, along with the tangible rewards we earned for our pains, made it unforgettable. It was a thoroughly invigorating experience, and I would do anything to do it all over again.


